I agree, PLEASE add the 5500 soon,

Yes - I too am waiting for the 5500 midi support. I'm chomping at the bit...I refuse to purchase REFLEX!!!

i also want native support for the denon dn-s1200 in the next version. thanxxx ;-)

Can the 5500 be controlling serato via timecode and the other buttons be midi mapped? I am considering geting these to replace my 1200;s and cdj800's but not sure if its the right choice

No, it's either midi mode or timecode, You cant have the deck in midi mode and also expect the buttons to be able to be programmed, it would get confused, If you use the timecode on a flash drive, it works great and until native support comes out, there is no need to midi map yet. Midi mapping does work great too but you lose the spinning platter because serato has not mapped it yet.

So brichi, you prefer these over the cdj-800's? Im thinking of going to "abra" as we long islanders remeber it to pick one up.

ahhhh, the good ol abracadabra, lol.

I definitely prefer these over the 800's, I feel I have more control and more "vinyl" like feel with the spinning platter. Plus there are a lot more features on it like midi, instant hot starts, effects (if you play songs off a drive, not serato), the display is really nice, it is a 2 in one player so you always can have a song loaded on the sendond deck as a "just in case", and it just feels better built and more solid, the 800's always felt like plastic to me.

The 5500 just offers so much more than even the cdj1000 and it is $400'ish cheaper than the 1000

also, when I was in abra about 2 weeks ago, they had some setup on display so you can go mess with them before you decide to buy them

+1 on the 5500 and 1200 support.... doing the timecode-on-flash-drive thing right now, but would love to do MIDI with the 5500 and SSL. Got a taste of what its like with the native support in Reflex, but its unstable as hell and I won't give up my SSL which has never crashed or dropped out on me.

+1. Please add Native support for the 5500. I will be a BETA tester.

I too will be a beta tester for the 5500's midi control

I tried mapping the Denon HS5500 with Serato using MIDI mode, and it works very well, but It's not the same as having native support and using its spinning platter to scratch. Serato has native support for all the awesome lineup of controllers that Denon has come out with, like: the 4500, 2500, and I think the S1200, but they're taking forever on the 5500. Reflex has already beat Serato to the punch and offers native support. I think Traktor might be close behind on native support. I want to keep my Rane gear, and SSL setup, so hopefuly we get this soon.

"Reflex has already beat Serato to the punch and offers native support."

Wow. What a sad day...I never thought i would see that. I am waiting, Serato. So is my new 5500's!

we NEED native support for these awesome controllers. these are the hottest decks on the market right now and we native support from the hottest DVS on the market.

yeah, these decks are really hot,,, I love em

And now as of July 28th, VDJ has beat them to it too, 5.2 posted here www.virtualdj.com

We don't know how well native support VDJ 5.2 PC/MAC did they make the HS5500?
I'll be watching for feedback to see if VDJ uses the HS5500 LCD and platter.

yeah, exactly,,,, I have been looking for some freedback too

freedback=feedback

here's a litle bit of a review from a vdj/5500 user

denondjforums.com

I need native support on my new Denon DN-HS5500.

The Platter, Hot Starts, Display, Play & Cue should be native. Everything else should be MIDI assignable by the user. I will Beta test!!!

bump lol

I second this support - I have 2 HS5500's myself and would love to see some kind of native support here. These controllers/decks are heads above anything else out there right now....so support would be great!

Please inform us as to when SSL will have native support for the denon 5500.

Please make it such that we can utilize (2) seperate players and not be relegated to using one player and it's 2 layers ( i.e. virtualdj v.5.2.(?))

I would love to be able to use all of the effects accessible on the controllers and have detailed information on the proper settings of the controller as it relates to your software.

Throwing my 2 pence worth into this thread, I'd like to see more support for the Denon DN-HC4500.

Pitch range is fixed at +/-8% (been told it's fixed and there's no option for changing the range. Would be great if you could choose say +/-4%, 8% and 16%

Brake and effects facilities are not supported.

Would love them to be included in Serato - make my life soooo much easier! :)

denon just did an update for the 5500's. included in that update was more items opened for better midi control. what is the holdup?

I heard it was coming in 1.8.3, but I don't know when.

Suggestions for the 5500:

Cue Points
• Function Keys 1-3 should be used for the Cue Points. Display Mode button should be used for Cue Point #4. And the Next File button should be used for Cue Point #5.
• 1 button (Function Key) to create a Cue Point (1 BUTTON = EASY) Not 3 steps www.scratchlive.net
• Flip + Function Key to Delete a Cue Point
• We need an option to keep playing when we hit a Cue Point from Pause Mode. Currently, when the music is paused, triggering a Cue Point plays, but once you let go of the button, the music stops (also called Stutter). I know you can hit Play while holding down the Function Key to keep playing, but it adds another unnecessary step. On all Denon players, you can disable/enable this by hitting the FLIP button.

Assignable MIDI
• Besides the buttons with backlights (Cue, Play, A1, A2, Platter Source, Tap, Playlist, Dump & Reverse), all buttons should be user assignable in MIDI. (For instance, I will always have the Key Lock (Key Adj.) option ON in Serato, so I will never use the Pitch/Key/Range button. Assigning it to the Sensor button would make a lot of sense.) I also want to be able to control the Auto Loops, Trancifier, and the new Loop Roll.

Loops
• We need an option to choose loop 1/2,1,2,4,8,16 regardless of which position is on the screen. Where is the 1 button to divide a loop by 2 and another button to multiply the loop by 2.

• We need a way to scroll through the loops. Flip + Exit to enable the current loop is nice on the HC4500, but we still need a way to use more than just 2 loops from the controller. This is where loops tied to Hot Starts is nice like in Serato ITCH. www.scratchlive.net

• Imagine pushing down on the effects knob (wet/dry) to create an 8 bar auto loop, rotate it counter clockwise to divide the loop by 2 or rotate it clockwise to multiply the loop by 2. You would have complete control to create your own Trancifier effect!!!

Subcrates
• We need a way to open and close the subcrates.

Pitch
• ±10% pitch resolution is a must. Give the user the option to select a pitch resolution. (We know it's going to be less accurate as the pitch increases because of the resolution of the hardware controller)

any news yet? I have found nothing on the forums about 5500 native support.
Please tell us what is going on,- I will be a beta tester !

no, nothing yet, Still waiting for the serato mods to let us know when it will be available. The denon is equipped with the capability, the software "reflex" already had full native control including platter control, Serato is a little behind on this one. It's usually because they like to make sure it is perfect, they really never release something like a native midi update unless it is rock solid. Lets hope soon

I too would like to know how close native support is for the 5500's. Using time code without being able to utilize the features in which I bought the players for really sucks. I love SSL and will NOT got to another software for the simple reason it has been flawless since the first day I started to use it. PLEASE...we need native support for the 5500 !!!

REFLEX is officially Dead. 67.18.16.226

Where is the DN-HS5500 native support. This controller is sick.

DON'T CLICK ON THIS STUPID LINK!!!!!!

What'S wrong with this link?

I clicked on it and windows started popping up everywhere.
BTW, I'm using Vista.

No problem with ff and adblocker.

You had to mention it here J.J. :-D
Not having Jorgen updating the code in Reflex, I think, is a bad idea. I was hoping for a Mac OS X version of Reflex Full with virtual skins and midi. Oh well, atleast SSL 1.8.3 is out. Guess I can wait and wish t0 skip to SSL 1.9 and see if more native support gets added to SSL for the Denon controllers. :-P

Let's hope so, but with no mods chiming in, I don't think it is coming anytime soon :(

Actually, Reflex (beta) is working on OSX. But you will never see an update from PCDJ. They split from development. Gizmolabs wanted to sell their own software. Funny thing is that PCDJ was suppose to own the code to Reflex. It's a messy divorce.

Besides the rotating platter, the DN-HS5500 MIDI is very similiar to the DN-HC4500. I hope 1.8.4 will have native support for the 5500.

One more for DN-S1200 & and DN-HS5500 support. Bring soon, please!

i also would like native support for DN-S1200 and DN-HS5500!!!!!!!

Native Support for the DN-HS5500!!! NOW!!! :)

DN-S3700 please. This feature would complete me... : )

VDJ 6.01 has the Denon DN-S3700 native support with user editable midi options.

+1 native support for denon 3700 please